Dresser & Wardrobe Assembly in Champaign, IL

The box should be square before drawers and doors are adjusted. A twisted carcass can cause slides or doors to bind. Hardware adjustment should happen after the main structure is upright and stable. Wardrobes can include fixed shelves, adjustable shelves, rods and accessory hardware that should be installed according to the product layout. A wardrobe door can be visually out of alignment while the cabinet is structurally fine; a dresser drawer can rub because the carcass is twisted or because the slide itself is misaligned. The final check should separate those causes before hardware is adjusted repeatedly.

Tall wardrobes can also include hanging rails or shelves that carry everyday loads. Those components should be seated in the intended supports before the unit is filled, and the cabinet should be in its final location before wall restraint is considered.

• Carcass stands square.
• Drawers move without binding.
• Doors align and close.
• Interior rails/shelves are seated.
• Final placement is stable.
• Restraint hardware matches product and wall condition.

Wardrobes with mirrored or glass doors may have more delicate front panels than ordinary cabinet furniture. Those pieces should be handled after the main carcass is stable rather than used to pull the cabinet square.

Use the site chat with the product type, height and whether it includes drawers, doors or restraint hardware.